Introduction
The Olsen Hegar Needle Holder 5 1/2″ is a mid-length combination instrument: ratcheted finger rings for control, jaws that hold the needle, and scissors built in for cutting the suture. This version adds tungsten carbide for a longer-lasting grip and a color coated finish for quick identification, and it belongs to a range available in different sizes and colors. Euro Surg makes each pair from German stainless steel. This page covers the uses, design, specifications, and care of the 5 1/2″ size.
Clinical applications
Surgeons and veterinary teams choose the Olsen Hegar Needle Holder 5 1/2″ for closures where one instrument should hold the needle and cut the suture. At 5 1/2″ it is a practical general-purpose length: long enough to reach across a typical incision and short enough to stay precise on smaller patients. Typical uses include spays and neuters, skin and subcutaneous closures, laceration repairs, and minor outpatient procedures. Clinics that want to color-code instruments by room or procedure can choose among the available colors.
Design advantages
The ratchet and finger rings give the surgeon control over the jaws, and the built-in scissors remove the need to swap instruments after each knot. On the Olsen Hegar Needle Holder 5 1/2″, tungsten carbide adds a harder, longer-lasting grip surface than plain steel, so the needle stays put through repeated passes. The color coated finish helps staff find the instrument on a busy tray, and the German stainless steel body resists corrosion through repeated cleaning and sterilization.
Technical specifications
| Specification | Detail |
|---|---|
| Product name | Olsen Hegar Needle Holder 5 1/2″ Tungsten Carbide (Scissors Combination, Color Coated) |
| Instrument type | Ratcheted finger-ring needle holder with built-in scissors |
| Overall length | 5 1/2″ (approx. 14 cm) |
| Jaws | Tungsten carbide |
| Finish | Color coated, available in different colors |
| Body material | German stainless steel |
| Sizes | Other sizes available |
| Reusable | Yes |
| Corrosion-resistant | Yes |
| Latex-free | Yes |
| Sterilization | Steam autoclave, per manufacturer instructions |
| Certifications | ISO 9001, ISO 13485, CE |
| Intended markets | Veterinary and general surgical |
Benefits in surgery
Holding the needle and cutting the suture with one instrument keeps the closure moving. The Olsen Hegar Needle Holder 5 1/2″ lets the surgeon tie the knot and trim the suture without reaching for scissors, and the carbide grip reduces the chance of the needle shifting mid-pass. Color coding by procedure or room cuts instrument mix-ups, and a reusable instrument that tolerates repeated sterilization keeps costs predictable.
Comparison with similar instruments
Compared with our standard Olsen Hegar combination, the Olsen Hegar Needle Holder 5 1/2″ adds tungsten carbide and a color coated finish. Compared with our gold-handled carbide holder, it offers a mid-length size and a choice of colors. Mayo-Hegar holders offer similar jaws without scissors, so a second instrument must cut the suture. Pair this instrument with our stitch scissors if you also need suture removal. Browse the wider needle holder category for other sizes and colors.
Care and maintenance
The Olsen Hegar Needle Holder 5 1/2″ should be rinsed immediately after use in order to ensure that there will be no blood or tissue residue on the instrument, in the jaws and scissors and on the ratchet. The cleaning of the needle holder is carried out using neutral pH detergent and a soft brush in order to clean the jaw tips and the box lock. During cleaning and sterilization, the ratchet should be opened in order to facilitate steam and cleaner access to all parts. After drying, put instrument milk on the box lock and the scissor joint and perform sterilization by steam autoclaving according to your facility procedure.
Why buy from Euro Surg
Euro Surg manufactures surgical and dental instruments for veterinary and general surgical markets. Every Olsen Hegar Needle Holder 5 1/2″ is made with a German stainless steel body under the certifications listed in the specifications above, and procurement teams can request documentation before placing a bulk order. Buy the Olsen Hegar Needle Holder 5 1/2″ Tungsten Carbide, Color Coated directly from Euro Surg, choose the color you need, and source matching scissors, forceps, and retractors for the same tray from one supplier.
FAQs
What is the Olsen Hegar Needle Holder 5 1/2″ used for?
It holds the needle during suturing and cuts the suture with built-in scissors. Tungsten carbide gives the jaws a firm grip, and the ratcheted finger rings keep the needle locked.
What material and design features does it have?
It has a German stainless steel body, tungsten carbide jaws, ratcheted finger-ring handles, and built-in scissors. The color coated finish comes in different colors, and the instrument is available in different sizes.
Can it be sterilized and reused?
Yes. It is reusable and can be sterilized in a steam autoclave following manufacturer instructions. Open the ratchet during cleaning and sterilization, and dry the instrument after each use to protect the inserts, the coating, and the scissor joint.
Is it ISO 9001, ISO 13485, and CE certified?
Yes. Euro Surg products are made under ISO 9001 and ISO 13485 quality systems and carry CE marking. Certification documents are available on request for procurement.
Why buy from Euro Surg?
Euro Surg is a surgical and dental instrument manufacturer serving veterinary and general surgical markets. You get German stainless steel construction, tungsten carbide jaws, a choice of colors and sizes, documented certification, and matching instruments from one supplier.
Reviews
There are no reviews yet.