Introduction
The Olsen Hegar needle holder 6 1/2″ inch combines a needle holder and a pair of scissors in one instrument. Ratcheted finger rings let the surgeon lock the needle in the jaws, and the built-in scissors cut the suture without a change of instrument. This version adds tungsten carbide gripping surfaces and a color coated finish. Euro Surg makes the Olsen Hegar needle holder 6.5 inch from German stainless steel for veterinary and general surgical use, and offers it in different variations.
Clinical applications
Surgeons and veterinary teams use the Olsen Hegar needle holder 6 1/2″ inch for suturing where one instrument has to hold the needle and cut the suture. At 6 1/2″ it is long enough to reach across a larger incision or into a deeper field, which makes it a practical choice for bigger patients and longer wound lines. Typical uses include skin and subcutaneous closures and routine repair in veterinary and general surgery. Variations of the instrument let a clinic choose the version that matches its tray and its preferences.
Design advantages
Ratcheted finger rings let the surgeon lock the instrument on the needle and release it between passes, and the built-in scissors remove the need to set the holder down to cut. On the Olsen Hegar needle holder 6 1/2″ inch, tungsten carbide gripping surfaces give a firmer hold on the needle and wear more slowly than plain steel. The body is German stainless steel, which resists corrosion through repeated cleaning and sterilization, and the finish is color coated.
Technical specifications
| Specification | Detail |
|---|---|
| Product name | Olsen Hegar Needle Holder Scissors Combination, Tungsten Carbide 6 1/2″, Color Coated |
| Also listed as | Olsen Hegar needle holder 6 1/2″ inch |
| Instrument type | Ratcheted finger-ring needle holder with built-in scissors |
| Overall length | 6 1/2″ (6 1/2″ inch, approx. 16.5 cm) |
| Gripping surface | Tungsten carbide |
| Finish | Color coated |
| Variations | Available in different variations |
| Material | German stainless steel |
| Reusable | Yes |
| Corrosion-resistant | Yes |
| Latex-free | Yes |
| Sterilization | Steam autoclave, per manufacturer instructions |
| Certifications | ISO 9001, ISO 13485, CE |
| Intended markets | Veterinary and general surgical |
Benefits in surgery
Holding the needle and cutting the suture with one instrument keeps the closure moving, because the surgeon does not reach for scissors after each knot. The Olsen Hegar needle holder 6 1/2″ inch adds reach to that workflow, and the tungsten carbide gripping surfaces help the needle stay in position through repeated passes. A reusable instrument that tolerates repeated sterilization also keeps replacement costs predictable for a busy clinic.
Comparison with similar instruments
Our 5 1/2″ Olsen Hegar needle holder is the shorter version of this combination instrument and suits smaller fields, while the Olsen Hegar needle holder 6 1/2″ inch gives more reach. Mayo Hegar needle holders hold the needle without built-in scissors, so a second instrument must cut the suture. Our Mathieu needle holder has a plier-style handle with a ratchet at the base, for surgeons who prefer that grip to finger rings. Crile Wood needle holders suit medium and small needles when the work is finer. Pair any holder with our stitch scissors, such as the Spencer or Littauer patterns, for suture removal. Browse the needle holder category for other handle styles and lengths, and the surgical scissors category for cutting instruments.
Care and maintenance
Rinse the instrument soon after use so blood and tissue do not dry in the jaws or on the scissor blades. Clean with a neutral pH detergent and a soft brush, working into the jaw tips and the box lock. Open the ratchet fully during cleaning and sterilization so steam and cleaner reach every surface. Dry it completely and apply instrument milk to the box lock and the scissor joint. Sterilize in a steam autoclave following manufacturer instructions. Avoid chloride-heavy solutions and abrasive pads, which can damage the coating and the steel. Tungsten carbide is hard but can chip if the instrument is dropped or forced, so inspect the gripping surfaces and the scissor edges under good light before each use. Store the instrument dry and away from other metal tools, and use the jaws only for needles and the blades only for suture.
Why buy from Euro Surg
Euro Surg is a manufacturer of surgical and dental instruments in Lahore, Pakistan, serving veterinary and general surgical markets. The Olsen Hegar needle holder 6 1/2″ inch from Euro Surg is made from German stainless steel under ISO 9001, ISO 13485 and CE certification and comes in different variations. Ordering from the manufacturer lets a practice source matching scissors and other instruments for the same tray from one supplier.
FAQs
What is the Olsen Hegar needle holder 6 1/2″ inch used for?
It holds the needle during suturing and cuts the suture with its built-in scissors. Ratcheted finger rings lock the instrument on the needle, and tungsten carbide gripping surfaces keep the hold firm.
What material and design features does it have?
It has a German stainless steel body, ratcheted finger-ring handles, built-in scissors and tungsten carbide gripping surfaces. The finish is color coated, and the instrument is available in different variations.
Can it be sterilized and reused?
Yes. It is reusable and can be sterilized in a steam autoclave following manufacturer instructions. Open the ratchet during cleaning and sterilization, and dry the instrument after each use to protect the coating and the scissor joint.
Is it ISO 9001, ISO 13485 and CE certified?
Yes. Euro Surg makes this instrument under ISO 9001 and ISO 13485 quality systems and CE certification.
Why buy from Euro Surg?
Euro Surg manufactures surgical instruments in Lahore, Pakistan, for veterinary and general surgical markets. You get German stainless steel construction, tungsten carbide gripping surfaces and a choice of variations from the maker.
Reviews
There are no reviews yet.